An introduction to the prospectr package

Antoine Stevens and Leonardo Ramirez-Lopez []


1 Preamble

prospectr is becoming more and more used in spectroscopic applications, which is evidenced by the number of scientific publications citing the package. This package is very useful for singal processing and chemometrics in general as it provides various utilities for pre–processing and sample selection of spectral data. While similar functions are available in other packages, like signal, the functions in this package works indifferently for data.frame, matrix and vector inputs. Besides, several functions are optimized for speed and use C++ code through the Rcpp and RcppArmadillo packages.

2 Introduction

Several spectroscopic techniques such as Near-Infrared (NIR) spectroscopy are high–troughput, non–destructive and cheap sensing methods that has a range of applications in agricultural, medical, food and environmental science. A number of R packages of interest for the spectroscopist is already available for processing and analysis of spectroscopic data.

Since the publication of the special special Volume in Spectroscopy and Chemometrics in R (Mullen and Stokkum 2007) many spectroscopy-related packages have been released. Most of these packages can be found at the following CRAN task views:

In addition, Bryan Hanson provides a list of Free Open Source Software (FOSS) dedictaed to Spectroscopic applications in general (see

3 Citing the package

prospectr is becoming more and more used in spectroscopic applications, which is evidenced by the number of scientific publications citing the package. This package is very useful for singal processing and chemometrics in general as provides various utilities for pre–processing and sample selection of spectral data. Please use the following citation. Simply type and you will get the info you need:

citation(package = "prospectr")
## To cite package 'prospectr' in publications use:
##   Antoine Stevens and Leornardo Ramirez-Lopez (2021). An introduction
##   to the prospectr package. R package Vignette R package version 0.2.2.
## A BibTeX entry for LaTeX users is
##   @Manual{,
##     title = {An introduction to the prospectr package},
##     author = {Antoine Stevens and Leornardo Ramirez-Lopez},
##     publication = {R package Vignette},
##     year = {2021},
##     note = {R package version 0.2.2},
##   }

4 Signal Processing

The aim of spectral pre-treatment is to improve signal quality before modeling as well as remove physical information from the spectra. Applying a pre-treatment can increase the repeatability/reproducibility of the method, model robustness and accuracy, although there are no guarantees this will actually work. The pre-processing functions that are currently available in the package are listed in Table 1.

Table 1. List of pre-processing functions

Function Name Description
movav simple moving (or running) average filter
savitzkyGolay Savitzky–Golay smoothing and derivative
gapDer gap–segment derivative
baseline baseline removal (similar to continuumRemoval)
continuumRemoval computes continuum–removed values
detrend detrend normalization
standardNormalVariate Standard Normal Variate (SNV) transformation
msc Multiplicative Scatter Correction
binning average a signal in column bins
resample resample a signal to new band positions
resample2 resample a signal using new FWHM values
blockScale block scaling
blockNorm sum of squares block weighting

We show below how they can be used, using the Near-Infrared (NIR) dataset (NIRsoil) included in the package (Fernandez-Pierna and Dardenne 2008). Observations should be arranged row-wise.

# NIRsoil is a data.frame with 825 obs and 5 variables: Nt (Total Nitrogen),
# Ciso (Carbon), CEC (Cation Exchange Capacity), train (vector of 0,1
# indicating training (1) and validation (0) samples), spc (spectral matrix)
## 'data.frame':    825 obs. of  5 variables:
##  $ Nt   : num  0.3 0.69 0.71 0.85 NA ...
##  $ Ciso : num  0.22 NA NA NA 0.9 NA NA 0.6 NA 1.28 ...
##  $ CEC  : num  NA NA NA NA NA NA NA NA NA NA ...
##  $ train: num  1 1 1 1 1 1 1 1 1 1 ...
##  $ spc  : num [1:825, 1:700] 0.339 0.308 0.328 0.364 0.237 ...
##   ..- attr(*, "dimnames")=List of 2
##   .. ..$ : chr [1:825] "1" "2" "3" "4" ...
##   .. ..$ : chr [1:700] "1100" "1102" "1104" "1106" ...

4.1 Noise removal

Noise represents random fluctuations around the signal that can originate from the instrument or environmental laboratory conditions. The simplest solution to remove noise is to perform \(n\) repetition of the measurements, and the average individual spectra. The noise will decrease with a factor \(\sqrt{n}\). When this is not possible, or if residual noise is still present in the data, the noise can be removed mathematically.

4.2 Moving average or runnnig mean

A moving average filter is a column-wise operation which average contiguous wavelengths within a given window size.

# add some noise
noisy <- NIRsoil$spc + rnorm(length(NIRsoil$spc), 0, 0.001) 
# Plot the first spectrum
plot(x = as.numeric(colnames(NIRsoil$spc)),
     y = noisy[1, ],
     type = "l",
     lwd = 1.5,
     xlab = "Wavelength", 
     ylab = "Absorbance") 
X <- movav(X = noisy, w = 11) # window size of 11 bands
# Note that the 5 first and last bands are lost in the process
lines(x = as.numeric(colnames(X)), y = X[1,], lwd = 1.5, col = "red")
       legend = c("raw", "moving average"), 
       lty = c(1, 1), col = c("black", "red"))
Effect of a moving average with window size of 11 bands on a raw spectrum

Figure 4.1: Effect of a moving average with window size of 11 bands on a raw spectrum

4.3 Savitzky-Golay filtering

Savitzky-Golay filtering (Savitzky and Golay 1964) is a very common preprocessing technique. It fits a local polynomial regression on the signal and requires equidistant bandwidth. Mathematically, it operates simply as a weighted sum of neighbouring values:

\[ x_j\ast = \frac{1}{N}\sum_{h=-k}^{k}{c_hx_{j+h}}\]

where \(x_j\ast\) is the new value, \(N\) is a normalizing coefficient, \(k\) is the number of neighbour values at each side of \(j\) and \(c_h\) are pre-computed coefficients, that depends on the chosen polynomial order and degree (smoothing, first and second derivative).

# p = polynomial order w = window size (must be odd) m = m-th derivative (0 =
# smoothing) The function accepts vectors, data.frames or matrices.  For a
# matrix input, observations should be arranged row-wise
sgvec <- savitzkyGolay(X = NIRsoil$spc[1, ], p = 3, w = 11, m = 0)
sg <- savitzkyGolay(X = NIRsoil$spc, p = 3, w = 11, m = 0)
# note that bands at the edges of the spectral matrix are lost !
## [1] 825 700
## [1] 825 690

4.4 Derivatives

Taking (numerical) derivatives of the spectra can remove both additive and multiplicative effects in the spectra and have other consequences as well (Table 2).

Table 2. Pro’s and con’s of using derivative spectra.

Advantage Drawback
Reduce of baseline offset Risk of overfitting the calibration model
Can resolve absorption overlapping Increase noise, smoothing required
Compensates for instrumental drift Increase uncertainty in model coefficients
Enhances small spectral absorptions Complicate spectral interpretation
Often increase predictive accuracy Remove the baseline !
for complex datasets

First and second derivatives of a spectrum can be computed with the finite difference method (difference between to subsequent data points), provided that the band width is constant:

\[ x_i' = x_i - x_{i-1}\]

\[ x_i'' = x_{i-1} - 2 \cdot x_i + x_{i+1}\]

In R, this can be simply achieved with the diff function in base:

# X = wavelength
# Y = spectral matrix
# n = order
d1 <- t(diff(t(NIRsoil$spc), differences = 1)) # first derivative
d2 <- t(diff(t(NIRsoil$spc), differences = 2)) # second derivative
     type = "l", 
     lwd = 1.5, 
     xlab = "Wavelength", 
     ylab = "")
lines(as.numeric(colnames(d2)), d2[1,], lwd = 1.5, col = "red")
       legend = c("1st der", "2nd der"), 
       lty = c(1, 1),
       col = c("black", "red"))
Effect of first derivative and second derivative

Figure 4.2: Effect of first derivative and second derivative

One can see that derivatives tend to increase noise. One can use gap derivatives or the Savitzky-Golay algorithm to solve this. The gap derivative is computed simply as:

\[ x_i' = x_{i+k} - x_{i-k}\]

\[ x_i'' = x_{i-k} - 2 \cdot x_i + x_{i+k}\]

where \(k\) is the gap size. Again, this can be easily achieved in R using the lag argument of the diff function

# first derivative with a gap of 10 bands
gd1 <- t(diff(t(NIRsoil$spc), differences = 1, lag = 10)) 

For more flexibility and control over the degree of smoothing, one could however use the Savitzky-Golay (savitzkyGolay) and Gap-segment derivative (gapDer) algorithms. The Gap-segment algorithms performs first a smoothing under a given segment size, followed by a derivative of a given order under a given gap size. Here is an exemple of the use of the gapDer function.

# m = order of the derivative
# w = window size ( = {2 * gap size} + 1)
# s = segment size
# first derivative with a gap of 10 bands
gsd1 <- gapDer(X = NIRsoil$spc, m = 1, w = 11, s = 10) 
     type = "l", 
     lwd = 1.5, 
     xlab = "Wavelength", 
     ylab = "")
lines(as.numeric(colnames(gsd1)), gsd1[1,], lwd = 1.5, col = "red")
       legend = c("1st der","gap-segment 1st der"), 
       lty = c(1,1), 
       col = c("black", "red"))
Effect of 1st-order gap-segment derivative

Figure 4.3: Effect of 1st-order gap-segment derivative

4.5 Scatter and baseline corrections

Undesired spectral variations due to light scatter effects and variations in effective path length can be removed using scatter corrections.

4.5.1 Standard Normal Variate (SNV)

Standard Normal Variate (SNV) is another simple way for normalizing spectra that intends to correct for light scatter. It operates row-wise:

\[ SNV_i = \frac{x_i - \bar{x_i}}{s_i}\]

snv <- standardNormalVariate(X = NIRsoil$spc)

According to Fearn (2008), it is better to perform SNV transformation after filtering (by e.g. Savitzky-Golay) than the reverse.

4.5.2 Multiplicative scatter correction (MSC)

Along with SNV, MSC (Geladi, MacDougall, and Martens 1985) this is one of the most widely used pre-processing techniques in NIR spectroscopy (Rinnan, Van Den Berg, and Engelsen 2009). This is a normalization method that attempts to account for additive and multiplicative effects by aligning each spectrum (\(x_i\)) with an ideal reference one (\(x_r\)) as follows: \[x_i = m_i x_r + a_i\] \[MSC(x_i) = \frac{a_i - x_i}{m_i}\] where \(a_i\) and \(m_i\) are the additive and multiplicative terms respectively.

# X = input spectral matrix
msc_spc <- msc(X = NIRsoil$spc, reference_spc = colMeans(NIRsoil$spc))

     type = "l", 
     xlab = "Wavelength, nm", ylab = "Absorbance", 
     lwd = 1.5)
      lwd = 1.5, col = "red")
axis(4, col = "red")
       legend = c("raw", "MSC signal"), 
       lty = c(1, 1),
       col = c("black", "red"))
Effect of MSC on raw spectra

Figure 4.4: Effect of MSC on raw spectra

par(new = FALSE)

Since the MSC-corrected is based on a reference spectrum, it is necessary to save this spectrum in order to apply the same type of processing to new spectra later on. The following code shows how this can be done in prospectr:

# a reference set of spectra
Xr <- NIRsoil$spc[NIRsoil$train == 1, ]

# an "unseen" set of spectra
Xu <- NIRsoil$spc[NIRsoil$train == 0, ]

# apply msc to Xr
Xr_msc <- msc(Xr)

# apply the same msc to Xu
attr(Xr_msc,"Reference spectrum") # use this info from the previous object

Xu_msc <- msc(Xu, reference_spc = attr(Xr_msc, "Reference spectrum"))

4.5.3 SNV-Detrend

The SNV-Detrend (Barnes, Dhanoa, and Lister 1989) further accounts for wavelength-dependent scattering effects (variation in curvilinearity between the spectra). After a SNV transformation, a 2\(^{nd}\)-order polynomial is fit to the spectrum and subtracted from it.

# X = input spectral matrix
# wav = band centers
dt <- detrend(X = NIRsoil$spc, wav = as.numeric(colnames(NIRsoil$spc)))
     type = "l", 
     xlab = "Wavelength", 
     ylab = "Absorbance", 
     lwd = 1.5)
par(new = TRUE)
     xaxt = "n", 
     yaxt = "n",
     xlab = "", 
     ylab = "", 
     lwd = 1.5, 
     col = "red", 
     type = "l")
axis(4, col = "red")
       legend = c("raw", "detrend signal"), 
       lty = c(1, 1),
       col = c("black", "red"))
Effect of SNV-Detrend on raw spectra

Figure 4.5: Effect of SNV-Detrend on raw spectra

par(new = FALSE)

4.5.4 Baseline removal

This method estimates the baseline of a given spectrum and subtract it from the original spectrum. For this, the baseline function comprises three basic steps:

  1. The convex hull points of each spectrum are identified using the grDevices::chull function.

  2. To obtain the baseline of each spectrum, the convex hull points are linearly interpolated to the same frequencies of the original spectra.

  3. The baseline of each spectrum is subtracted from the original input spectrum.


wav <- as.numeric(colnames(NIRsoil$spc))
# plot of the 3 first absorbance spectra
        t(NIRsoil$spc[1:3, ]),
        type = "l",
        ylim = c(0, .6),
        xlab = "Wavelength /nm",
        ylab = "Absorbance")
bs <- baseline(NIRsoil$spc, wav)
matlines(wav, t(bs[1:3, ]))
fitted_baselines <- attr(bs, "baselines")
matlines(wav, t(fitted_baselines[1:3, ]))
Absorbance spectra, baseline spectra and baseline corrected spectra

Figure 4.6: Absorbance spectra, baseline spectra and baseline corrected spectra

4.6 Centering and scaling

Centering and scaling tranforms a given matrix to a matrix with columns with zero mean (centering), unit variance (scaling) or both (auto-scaling):

\[ Xc_{ij} = X_{ij} - \bar{X}_{j} \]

\[ Xs_{ij} = \frac{X_{ij} - \bar{X}_{j}}{s_{j}} \]

where \(Xc\) and \(Xs\) are the mean centered and auto-scaled matrices, \(X\) is the input matrix, \(\bar{X}_{j}\) and \(s_{j}\) are the mean and standard deviation of variable \(j\).

In R, these operations are simply obtained with the scale function. Other types of scaling can be considered. Spectroscopic models can often be improved by using ancillary data (e.g. temperature, …) (Fearn 2010). Due to the nature of spectral data (multivariate), other data would have great chance to be dominated by the spectral matrix and have no chance to contribute significantly to the model due to purely numerical reasons (Eriksson et al. 2006). One can use block scaling to overcome this limitation. It basically uses different weights for different block of variables. With soft block scaling, each block is scaled (ie each column divided by a factor) such that the sum of their variance is equal to the square root of the number of variables in the block. With hard block scaling, each block is scaled such that the sum of their variance is equal to 1.

# X = spectral matrix type = 'soft' or 'hard' The ouptut is a list with the
# scaled matrix (Xscaled) and the divisor (f)
bs <- blockScale(X = NIRsoil$spc, type = "hard")$Xscaled
sum(apply(bs, 2, var))  # this works!
## [1] 1

he problem with block scaling is that it down-scale all the block variables to the same variance. Since sometimes this is not advised, one can alternatively use sum of squares block weighting . The spectral matrix is multiplied by a factor to achieve a pre-determined sum of square:

# X = spectral matrix targetnorm = desired norm for X
bn <- blockNorm(X = NIRsoil$spc, targetnorm = 1)$Xscaled
sum(bn^2)  # this works!
## [1] 1

5 Resampling

To match the response of one instrument with another, a signal can be resampled to new band positions by simple interpolation (resample) or using full width half maximum (FWHM) values (resample2).

6 Other transformations

6.1 Continuum removal

The continuum removal technique was introduced by Clark and Roush (1984) as an effective method to highlight absorption features of minerals. It can be viewed as an albedo normalization technique. This technique is based on the computation of the continuum (or envelope) of a given spectrum. It is very similar to baseline, however it differs from it in the third step, in which instead of a baseline subtraction it divides the original spectrum by its continuum as follows:

\[\phi_{i} = \frac{x_{i}}{c_{i}}; i=\left \{ 1,..., p\right\}\]

where \(x_{i}\) and \(c_{i}\) are the original and the continuum reflectance (or absorbance) values respectively at the \(i\)^th wavelength of a set of \(p\) wavelengths, and \(\phi_{i}\) is the final reflectance (or absorbance) value after continuum removal.

The continuumRemoval function allows to compute the continuum-removed values of either reflectance or absorbance spectra.

# type of data: 'R' for reflectance (default), 'A' for absorbance
cr <- continuumRemoval(X = NIRsoil$spc, type = "A")
# plot of the 10 first abs spectra
        type = "l",
        lty = 1,
        ylim = c(0,.6),
        xlab="Wavelength /nm", 
matlines(as.numeric(colnames(NIRsoil$spc)), lty = 1, t(cr[1:3, ]))
Absorbance and continuum-removed absorbance spectra

Figure 6.1: Absorbance and continuum-removed absorbance spectra

7 Calibration sampling algorithms

Calibration models are usually developed on a representative portion of the data (training set) and validated on the remaining set of samples (test/validation set). There are several solutions for selecting samples, e.g.:

For selecting representative samples, the prospect package provides functions that use the third solution. The following functions are available:

7.1 \(k\)-means sampling (naes)

The \(k\)-means sampling simply uses \(k\)-means clustering algorithm. To sample a subset of \(n\) samples \(X_{tr} = \left \{ {x_{tr}}_{j} \right \}_{j=1}^{n}\), from a given set of \(N\) samples \(X = \left \{ x_i \right \}_{i=1}^{N}\) (note that \(N>n\)) the algorithm works as follows:

  1. Perform a \(k\)-means clustering of \(X\) using \(n\) clusters.

  2. Extract the \(n\) centroids (\(c\), or prototypes). This can be also the sample that is the farthest away from the centre of the data, or a random selection. See the method argument in naes

  3. Calculate the distance of each sample to each \(c\).

  4. For each \(c\) allocate in \(X_{tr}\) its closest sample found in \(X\).

# X = the input matrix
# k = number of calibration samples to be selected
# pc = if pc is specified, k-mean is performed in the pc space 
# (here we will use only the two 1st pcs)
# iter.max =  maximum number of iterations allowed for the k-means clustering.
kms <- naes(X = NIRsoil$spc, k = 5, pc = 2, iter.max = 100)
# Plot the pcs scores and clusters
plot(kms$pc, col = rgb(0, 0, 0, 0.3), pch = 19, main = "k-means") 
# Add the selected points
points(kms$pc[kms$model, ], col = "red", pch = 19)
Selection of 5 samples by k-means sampling

Figure 7.1: Selection of 5 samples by k-means sampling

7.2 Kennard-Stone sampling (kenStone)

To sample a subset of \(n\) samples \(X_{tr} = \left \{ {x_{tr}}_{j} \right \}_{j=1}^{n}\), from a given set of \(N\) samples \(X = \left \{ x_i \right \}_{i=1}^{N}\) (note that \(N>n\)) the Kennard-Stone (CADEX) sampling algorithm consists in Kennard and Stone (1969):

  1. Find in \(X\) the samples \({x_{tr}}_1\) and \({x_{tr}}_2\) that are the farthest apart from each other, allocate them in \(X_{tr}\) and remove them from \(X\).

  2. Find in \(X\) the sample \({x_{tr}}_3\) with the maximum dissimilarity to \(X_{tr}\). Allocate \({x_{tr}}_3\) in \(X_{tr}\) and then remove it from \(X\). The dissimilarity between \(X_{tr}\) and each \(x_i\) is given by the minimum distance of any sample allocated in \(X_{tr}\) to each \(x_i\). In other words, the selected sample is one of the nearest neighbours of the points already selected which is characterized by the maximum distance to the other points already selected.

  3. Repeat the step 2 n-3 times in order to select the remaining samples (\({x_{tr}}_4,..., {x_{tr}}_n\)).

The Kennard-Stone algorithm allows to create a calibration set that has a flat distribution over the spectral space. The metric used to compute the distance between points can be either the Euclidean distance or the Mahalanobis distance. One of the drawbacks of this algorithm is that it is prone to outlier selection (Ramirez-Lopez et al. 2014), therefore outlier analysis is recommended before sample selection.

Let’s see some examples…

# Create a dataset for illustrating how the calibration sampling 
# algorithms work
X <- data.frame(x1 = rnorm(1000), x2 = rnorm(1000))
plot(X, col = rgb(0, 0, 0, 0.3), pch = 19, main = "Kennard-Stone (synthetic)") 
# kenStone produces a list with row index of the points selected for calibration
ken <- kenStone(X, k = 40) 
# plot selected points
points(X[ken$model,], col = "red", pch = 19, cex = 1.4) 
Selection of 40 calibration samples with the Kennard-Stone algorithm

Figure 7.2: Selection of 40 calibration samples with the Kennard-Stone algorithm

# Test with the NIRsoil dataset
# one can also use the mahalanobis distance (metric argument)
# computed in the pc space (pc argument)
ken_mahal <- kenStone(X = NIRsoil$spc, k = 20, metric = "mahal", pc= 2)
# The pc components in the output list stores the pc scores
     col = rgb(0, 0, 0, 0.3), 
     pch = 19, 
     xlab = "PC1",
     ylab = "PC2",
     main = "Kennard-Stone") 
# This is the selected points in the pc space
points(ken_mahal$pc[ken_mahal$model, 1], 
       pch = 19, col = "red") 
Kennard-Stone sampling on the NIRsoil dataset

Figure 7.3: Kennard-Stone sampling on the NIRsoil dataset

7.3 DUPLEX (duplex)

The Kennard-Stone algorithm selects calibration samples. Often, we need also to select a validation subset. The DUPLEX algorithm (Snee 1977) is a modification of the Kennard-Stone which allows to select a validation set that have similar properties to the calibration set. DUPLEX, similarly to Kennard-Stone, begins by selecting pairs of points that are the farthest apart from each other, and then assigns points alternatively to the calibration and validation sets.

dup <- duplex(X = X, k = 15) # k is the number of selected samples
plot(X, col = rgb(0, 0, 0, 0.3), pch = 19, main = "DUPLEX") 
# calibration samples
points(X[dup$model, 1], X[dup$model, 2], col = "red", pch = 19) 
# validation samples
points(X[dup$test,1], X[dup$test,2], col = "dodgerblue", pch = 19) 
       legend = c("calibration", "validation"), 
       pch = 19, 
       col = c("red", "dodgerblue"))
Selection of 15 calibration and validation samples with the DUPLEX algorithm

Figure 7.4: Selection of 15 calibration and validation samples with the DUPLEX algorithm

7.4 SELECT algorithm (shenkWest)

The SELECT algorithm (Shenk and Westerhaus 1991) is an iterative procedure which selects the sample having the maximum number of neighbour samples within a given distance (d.min argument) and remove the neighbour samples of the selected sample from the list of points. The number of selected samples depends on the chosen treshold (default = 0.6). The distance metric is the Mahalanobis distance divided by the number of dimensions (number of pc components) used to compute the distance. Here is an example of how the shenkWest function might work:

shenk <- shenkWest(X = NIRsoil$spc, d.min = 0.6, pc = 2)
plot(shenk$pc, col = rgb(0, 0, 0, 0.3), pch = 19, main = "SELECT") 
points(shenk$pc[shenk$model,], col = "red", pch = 19)
Selection of samples with the SELECT algorithm

Figure 7.5: Selection of samples with the SELECT algorithm

7.5 Puchwein algorithm (puchwein)

The Puchwein algorithm is yet another algorithm for calibration sampling (Puchwein 1988) that create a calibration set with a flat distribution. A nice feature of the algorithm is that it allows an objective selection of the number of required calibration samples with the help of plots. First the data is usually reduced through PCA and the most significant PCs are retained. Then the mahalanobis distance (\(H\)) to the center of the matrix is computed and samples are sorted decreasingly. The distances betwwen samples in the PC space are then computed.

Here are the steps followed by the algorithm:

pu <- puchwein(X = NIRsoil$spc, k = 0.2, pc =2)
plot(pu$pc, col = rgb(0, 0, 0, 0.3), pch = 19, main = "puchwein") 
points(pu$pc[pu$model,],col = "red", pch = 19) # selected samples
Samples selected by the Puchwein algorithm

Figure 7.6: Samples selected by the Puchwein algorithm

par(mfrow = c(2, 1))
     type = "l",
     xlab = "# samples removed",
     ylab="Difference between th. and obs sum of leverages")
# This basically shows that the first loop is optimal
plot(pu$leverage$loop,nrow(NIRsoil) - pu$leverage$removed,
     xlab = "# loops",
     ylab = "# samples kept", type = "l")
par(mfrow = c(1, 1))

7.6 Honigs (honigs)

The Honigs algorithm selects samples based on the size of their absorption features (Honigs et al. 1985). It can works both on absorbance and continuum-removed spectra. The sample having the highest absorption feature is selected first. Then this absorption is substracted from other spectra and the algorithm iteratively select samples with the highest absorption (in absolute value) until the desired number of samples is reached.

# type = "A" is for absorbance data
ho <- honigs(X = NIRsoil$spc, k = 10, type = "A") 
# plot calibration spectra
        type = "l",
        xlab = "Wavelength", ylab = "Absorbance")
# add bands used during the selection process
abline(v = as.numeric(colnames(NIRsoil$spc))[ho$bands], lty = 2)
Spectra selected with the Honigs algorithm and bands used

Figure 7.7: Spectra selected with the Honigs algorithm and bands used


Barnes, RJ, Mewa Singh Dhanoa, and Susan J Lister. 1989. “Standard Normal Variate Transformation and de-Trending of Near-Infrared Diffuse Reflectance Spectra.” In Applied Spectroscopy, 43:772–77. 5. SAGE Publications Sage UK: London, England.
Clark, Roger N, and Ted L Roush. 1984. “Reflectance Spectroscopy: Quantitative Analysis Techniques for Remote Sensing Applications.” In Journal of Geophysical Research: Solid Earth, 89:6329–40. B7. Wiley Online Library.
Eriksson, Lennart, Erik Johansson, N Kettaneh-Wold, Johan Trygg, C Wikström, and Svante Wold. 2006. Multi-and Megavariate Data Analysis. Vol. 1. Umetrics Sweden.
Fearn, Tom. 2008. “The Interaction Between Standard Normal Variate and Derivatives.” NIR News 19 (7): 16–17.
———. 2010. “Combining Other Predictors with NIR Spectra.” NIR News 21 (2): 13–16.
Fernandez-Pierna, Juan Antonio, and Pierre Dardenne. 2008. “Soil Parameter Quantification by NIRS as a Chemometric Challenge at ‘Chimiométrie 2006’.” Chemometrics and Intelligent Laboratory Systems 91 (1): 94–98.
Geladi, P, D MacDougall, and H Martens. 1985. “Linearization and Scatter-Correction for Near-Infrared Reflectance Spectra of Meat.” Applied Spectroscopy 39 (3): 491–500.
Honigs, DE, Gary M Hieftje, HL Mark, and TB Hirschfeld. 1985. “Unique-Sample Selection via Near-Infrared Spectral Subtraction.” Analytical Chemistry 57 (12): 2299–2303.
Kennard, Ronald W, and Larry A Stone. 1969. “Computer Aided Design of Experiments.” Technometrics 11 (1): 137–48.
Mullen, Katharine M, and Ivo HM van Stokkum. 2007. “An Introduction to the’special Volume Spectroscopy and Chemometrics in r’.” Journal of Statistical Software 18 (01).
Naes, T, T Isaksson, T Fearn, and T Davies. 2002. “Outlier Detection. A User-Friendly Guide to Multivariate Calibration and Classification.” NIR Publications, Chichester.
Puchwein, Gerd. 1988. “Selection of Calibration Samples for Near-Infrared Spectrometry by Factor Analysis of Spectra.” Analytical Chemistry 60 (6): 569–73.
Ramirez-Lopez, Leonardo, Karsten Schmidt, Thorsten Behrens, Bas Van Wesemael, Jose AM Demattê, and Thomas Scholten. 2014. “Sampling Optimal Calibration Sets in Soil Infrared Spectroscopy.” Geoderma 226: 140–50.
Rinnan, Åsmund, Frans Van Den Berg, and Søren Balling Engelsen. 2009. “Review of the Most Common Pre-Processing Techniques for Near-Infrared Spectra.” TrAC Trends in Analytical Chemistry 28 (10): 1201–22.
Savitzky, Abraham, and Marcel JE Golay. 1964. “Smoothing and Differentiation of Data by Simplified Least Squares Procedures.” Analytical Chemistry 36 (8): 1627–39.
Shenk, JS, and MO Westerhaus. 1991. “Population Definition, Sample Selection, and Calibration Procedures for Near Infrared Reflectance Spectroscopy.” Crop Science 31 (2): 469–74.
Snee, Ronald D. 1977. “Validation of Regression Models: Methods and Examples.” Technometrics 19 (4): 415–28.